
Balls circulate between an inner and outer race, orbiting slower than the shaft that drives them and spinning hard on their own axes.
Gear Train

Cut gears mesh tooth for tooth along a zig-zag shaft line, each wheel turning the other way at the ratio its tooth count demands.
Real cut gears meshing at correct tooth ratios on a seamless loop. Set the gear count, tooth size, layout and colors, then export MP4 for explainers and Shorts.
Part of Kinetic & Satisfying Loops. New to this kind of graphic? Read How to Make Satisfying Loop Videos Without 3D Software.
Transparent exports and editor imports are explained in the transparent video guide, and every download is free under the commercial license.
Style: background, primary, secondary and accent. Layout: aspect ratio and count. Motion: duration, speed and intensity.
Gear Train runs 10 seconds by default, and you can set any length up to 20 seconds before you export. It loops seamlessly.
Show Gear Train while explaining gear ratios in an engineering lesson, or as a metaphor for departments working together in a company film. Because each wheel turns at its true ratio, it holds up when mechanically minded viewers look closely.

Balls circulate between an inner and outer race, orbiting slower than the shaft that drives them and spinning hard on their own axes.

Mixed balls lift out of the jumbled tubes one by one, arc over the row and drop into the empty tube that matches their colour, then scatter back to start.

A roller chain runs a large sprocket against a small one, every roller seated on a tooth, the small wheel spinning faster for the teeth it gives up.

The escape wheel releases one tooth at a time as the pallet fork rocks, and the balance wheel winds its hairspring back and forth to keep the beat.

Blocks ride a segmented belt past a row of pushers, each one punching its own colour down a drop hole, and the bins below rise as they fill.

A line of dominoes topples along a rolling ground line, each tile tipping into the next, and stands itself back up behind the wave.

A bank of cams on one shaft lifts a row of rods slightly out of step, so their tips carry a smooth wave along the machine and back again.

A scoop wheel picks marbles out of the pit, carries them up and over the top, and tips each one onto the return rail to roll all the way back.